Model JV250

Print This Page

Enlarge Picture

Model JV250
2 Preset Counter Controlled
Toroidal Winding Machine
our Low-Cost Winding Machine

By eliminating some options not needed for the winding of certain applications, Jovil has developed a low-cost machine while retaining the same quality construction as in our microprocessor controlled JV100BE-2

The two main features eliminated are:

1. The Microprocessor
2. The ability to rotate the core in the CW direction.

The JV250 is available with one of two different counters:

The JV57 a dual preset counter with no deceleration. (Standard)

The LGM a four preset counter with deceleration. (Optional)

The JV250 base will accept all winding heads, core rotators, taping heads and shuttles currently used on the model JV100BE.

Specification / Capabilities
Maximum wire size #16 awg (1.4mm)
Minimum wire size #46 awg (0.05mm)
Maximum coil OD 4.000" (101.6mm)
Minimum coil OD 0.187" (4.7mm)
Minimum coil ID 0.040" (1.0mm)
Maximum coil HT 2.000" (50.8mm)
Winding speeds Variable to 2000 tpm
Wire spacing Automatic variable
Deceleration control Only with LGM type counter
Motor 1/2 HP - 7600 RPM-DC - with dynamic braking
Power requirement 110-120V, 50-60 cycles (220V optional)
Crated dimensions 37" x 37" x 42" (94 x 94 107cm)
Crated weight 200 lbs (90 kg)

JV250 accessories specifications:
Principal and Optional Features

Separate speed controls for loading and winding
Power driven core rotation with automatic core reversing - infinitely variable
Variable wire spacing control
Floating drive for centering core during winding - single knob control
Electronic linear pick-up for loading (feet or meters)
Controls for operating taping head
Quick change winding heads and core rotators
Push button and/or footswitch control
Positive core rotation with minimum backlash

This free script provided by JavaScript Kit