Print This Page

Enlarge Picture

Model JV225 Dedicated Taping Machine works with 9" and 14" Taping Heads

Specification / Capabilities Maximum coil OD 10.000" (254.0mm) Minimum coil OD 1.500" (38.0mm) Minimum coil ID 0.065" (16.50mm) Maximum coil HT 3.500" (88.9mm) Taping speeds Variable to 200 wraps per minute Tape overlap Automatic variable Counter Dual preset electronic Core rotation Automatic in counter clockwise direction only Motor control Variable speed footpedal Motor 1/2 HP - 1750 RPM-DC Power requirement 110-120V, 50-60 cycles (220V optional) Crated dimensions 37" x 37" x 42" (94 x 94 107 cm) Crated weight 250 lbs (114 kg)

Principal and Optional Features Obsoletes need to tie up winding machine when taping (dedicated for taping) 9" and 14" diameter taping heads fit readily to the JV225 base 5 minute changeover of heads Same roller table used for all taping heads Interchangeable magazines to accommodate standard tape widths For applying a variety of non-adhesive tapes on toroidal coil applications Mylar, polyester, paper, varnished silk, fiberglass, cloth, copper shielding, etc. Simple dual preset counter controls measure of tape supply and number of wraps onto core Automatic cut-off from spool Dereeler handles up to 12" diameter tape spools Pitch for tape overlap fully adjustable Variable speed footpedal controlled

See the Tape Heads for the JV225:   Tape Heads