Models SMC-1, SMC-2, JV100BE-2 and JV250 Accessories

Jovil's Flat Belt Winding Heads

Are you winding the majority of you toroidal cores with a pull winder or by hand?
Wouldn't it be fantastic if up to 80% of that work could be transferred to an automatic machine? If so, then these new Flat Belt Winding Heads from Jovil can help. We all know that the most difficult job for an automatic toroidal winding machine has been the winding of heavy wire sizes through small core inside diameters. With these new heads, Jovil is capable of winding the heaviest wire sizes through the smallest core inside diameter.

6"Flat Belt Head

Enlarge Picture

Maximum coil OD: 2.500" (63.5 mm)
Minimum coil OD: 0.625" (15.8 mm)
Minimum coil ID: 0.375" (10.0 mm)
Maximum coil HT: 1.500" (38.0 mm)
Wire size: #16-#26 awg (1.40 - 0.4 mm)
4"Flat Belt Head

Enlarge Picture

Maximum coil OD: 1.500" (38.0 mm)
Minimum coil OD: 0.375" (10.0 mm)
Minimum coil ID: 0.250" (6.0 mm)
Maximum coil HT: 1.000" (25,4 mm)
Wire size: #16-#30 awg (1.4 - 0.25 mm)
2"Flat Belt Head

Enlarge Picture

Maximum coil OD: 0.375" (10.0mm)
Minimum coil OD: 0.187" (4.7mm)
Minimum coil ID: 0.075" (1.91mm)
Maximum coil HT: 0.156" (3.90mm)
Wire size: #26-#40awg (0.40 - 0.08mm)